This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Here are the plans for the fin that is proper with the M64A1 500 LB. GP Bomb. It was the bomb dropped in the greatest numbers by the allies in WWII.
To get a fin fabricated, find a shop that has metal cutting (laser or hi-def plasma), metal forming (Press Break), and welding capability all in the same shop to keep your cost at a minimum.
Before fabricating, try fining one in the German area of influence during the war. There should be a lot of them. You might be able to get enough parts to make one up.
The sleeve in the third photo can be made by welding a strip into a pipe shape, and then welding that onto a round doughnut shape. Instead of making dimples on the round piece, you could use 1/4" thick metal for the plate. You just need a standoff, so the retaining nut can enter into the hole to center the fin on the bomb.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.