Welcome to the Inert Ordnance Collectors.
Results 1 to 5 of 5
  1. #1
    Premium Member
    Join Date
    Jul 2008
    Location
    United Kingdom
    Posts
    4,385
    Thanks
    1,491
    Thanked 1,516 Times in 646 Posts

    Two thirds British number 1 grenade

    I've never made a model in my life so this is a first for me.

    The difficulty for me was that I don't have access to a lathe, so everything you see here was done by hand, with an electric sander or cut with a Dremel.
    Why would anyone bother making this I hear some of you say?? Well, I'm one of those people who doesn't bother with TV, social media, electronic games and all the other good stuff but I do like fiddling around in the workshop :-)

    The start was to buy a piece of 25mm brass pipe off ebay. That set the size for the rest of the project, the diameter of the body on a real number 1 being about 40mm, so all measurements were 25/40th of the real thing.

    The handle was made from the top part of an old snooker cue and an old curtain pole for the wide part that fits inside the brass body of the grenade. The tape is 1 inch herringbone dressmakers tape off ebay (ones on full size number 1 grenades are 1.5 inch wide tape).
    IMG_3822.JPG

    The frag ring is.......a relic locking ring off a Tiger Tank track pin, with some filler to make it wider. Frag ring grooves could then be cut.
    IMG_3819.JPG

    The cap was a problem. I needed a tube that would fit over the 25mm outer diameter of the body. A brass 1 inch flare pistol case did the job, cut down, sanded to remove the rim and shaped. I'm not good enough at making things to model the correct cap for a No 1 Mk 1 long handled grenade so I cheated a bit and made one like the simpler cap of the No 1 Mk 3. The cut outs were done with a Dremel.
    The pin was the hardest part. Drilling a piece of 3mm bar (the spike in the cap) with a Dremel (I don't have a pillar drill) to fit a 2mm piece of brass wire through it (the pin) was tricky.
    IMG_3818.JPGIMG_3821.JPG



    The top of the grenade body is a brass washer with some tiny screws that screw into the wood of the body. The detonator is the aluminium plug that a masonry nail fits into (found in the DIY section of the shed!!).
    IMG_3819.JPGIMG_3820.JPG

    The belt hook is 2mm brass wire, glued to the body.
    IMG_3817.JPG

    The 2 guides for the cap when in the fire position (the little red bits forward of the frag ring) are made from metal curtain rings and glued on.
    IMG_3817..jpg

    Here's a comparison to a real one.
    IMG_3816.jpgIMG_3817.jpg

    I couldn't do the stamping for the cap. When I work out how to do that I'll complete it but it'll do for now.

    Dave.
    Last edited by SG500; 5th May 2019 at 10:35 PM.

  2. The Following 12 Users Say Thank You to SG500 For This Useful Post:

    Andysarmoury (5th May 2019), bacarnal (23rd June 2019), Bonnex (5th May 2019), Burney Davis (5th May 2019), copdoc (7th May 2019), doppz92 (6th May 2019), proditto (5th May 2019), pysall (6th May 2019), roller63 (6th May 2019), siegfreid (5th May 2019), Snufkin (6th May 2019), wichitaslumlord (6th May 2019)

  3. #2
    Premium Member
    Join Date
    Jul 2007
    Location
    Suffolk
    Posts
    1,556
    Images
    13
    Thanks
    1,228
    Thanked 229 Times in 153 Posts
    Well done Dave you have done a great job.
    Regards
    Andy

  4. The Following User Says Thank You to Andysarmoury For This Useful Post:

    SG500 (5th May 2019)

  5. #3
    Premium Member
    Join Date
    Jul 2012
    Location
    U.K.
    Posts
    97
    Blog Entries
    1
    Thanks
    98
    Thanked 59 Times in 36 Posts
    Dave,
    you need to spend less time in the workshop & refresh your mailbox as it is currently "choked" !
    Rod

  6. The Following User Says Thank You to pysall For This Useful Post:

    SG500 (6th May 2019)

  7. #4
    Premium Member
    Join Date
    Jul 2008
    Location
    United Kingdom
    Posts
    4,385
    Thanks
    1,491
    Thanked 1,516 Times in 646 Posts
    A bit more fiddling around in the workshop and along came the No 1 Mk 3 :-)

    Dave.

    IMG_3878.jpgIMG_3877.jpgIMG_3876.jpgIMG_3879.jpg

  8. The Following 3 Users Say Thank You to SG500 For This Useful Post:

    Andysarmoury (23rd June 2019), doppz92 (23rd June 2019), siegfreid (23rd June 2019)

  9. #5
    Premium Member
    Join Date
    Jul 2007
    Location
    Suffolk
    Posts
    1,556
    Images
    13
    Thanks
    1,228
    Thanked 229 Times in 153 Posts
    A Brilliant job and well done
    Andy

  10. The Following User Says Thank You to Andysarmoury For This Useful Post:

    SG500 (23rd June 2019)

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top