Welcome to the Inert Ordnance Collectors.
Results 1 to 10 of 14

Hybrid View

  1. #1
    Senior Member
    Join Date
    Dec 2007
    Location
    Erewhon
    Posts
    207
    Thanks
    164
    Thanked 57 Times in 32 Posts

    .50", projectile identification.

    Three types of .50" projectiles were kindly given to me recently, among them were two examples of the well known observing round with its yellow over red coloured tip. The other two have me stumped though.....the example with the ( I assumed ) black tip, I took to be an armour piercing type until I looked at the base and saw a copper cap, leading me to believe that this is in fact a tracer with a discoloured tip colour ( looking at it under a strong light, it could be a very deep red)...it comes in at 604 grains and is only mildly magnetic. Perhaps some member can confirm my thoughts.

    The last type is chrome plated and my thinking is that it has been removed from a display round or some such like....mildly magnetic it comes in at 696 grains. The core showing at the rear can be scratched and shows it is not hardened.

    Bockscar.


    image.jpgimage.jpgimage.jpgimage.jpg

  2. #2
    Premium Member
    Join Date
    Mar 2009
    Location
    U.S.
    Posts
    4,397
    Thanks
    652
    Thanked 1,218 Times in 703 Posts
    Tracer rounds usually have a straight skirt of full diameter all the way to the base, instead of a boat tail, and are longer to contain the tracer. It provides room for the tracer material. Yours has no room for tracer material.
    Last edited by HAZORD; 14th September 2019 at 02:08 PM.
    ___HAZ/
    _____/ORD Hazardous Ordnance Recognition
    ________Saving Lives Through Education

  3. The Following User Says Thank You to HAZORD For This Useful Post:

    Bockscar (15th September 2019)

  4. #3
    Senior Member
    Join Date
    Feb 2016
    Location
    Atlanta
    Posts
    513
    Thanks
    398
    Thanked 192 Times in 117 Posts
    The red/ yellow tip are spotter tracer. They are used with the Recoiless round cannons ( 106mm I believe) and belong in a special shortened .50 BMG case. Talon ( before going out of business ) pulled them from old USGI spotter tracer round lots and mounted them in a standard .50 BMG case. I have a few boxes of these, and used to shoot them from my .50 cal. Very impressive, when impacting metal, they explode with a huge flash of light and smoke. More info when I can find TM info.

  5. The Following User Says Thank You to 917601 For This Useful Post:

    Bockscar (15th September 2019)

  6. #4
    Senior Member
    Join Date
    Feb 2016
    Location
    Atlanta
    Posts
    513
    Thanks
    398
    Thanked 192 Times in 117 Posts
    https://cartridgecollectors.org/cmo/cmo08dec.htm
    Attached Images Attached Images

  7. The Following User Says Thank You to 917601 For This Useful Post:

    Bockscar (15th September 2019)

  8. #5
    Senior Member
    Join Date
    Mar 2015
    Location
    new zealand
    Posts
    488
    Thanks
    0
    Thanked 338 Times in 138 Posts
    those spotter/tracer rounds are quite sensitive and are not "drop safe",you should be careful with them

  9. The Following User Says Thank You to kiwieod For This Useful Post:

    Bockscar (15th September 2019)

  10. #6
    Senior Member
    Join Date
    Feb 2016
    Location
    Atlanta
    Posts
    513
    Thanks
    398
    Thanked 192 Times in 117 Posts
    I believe your .50 black tip is AP. The base looks very similar to .30 AP. I cut a few open to expose the penetrator. Likely they use the same manufacture process?
    Attached Images Attached Images

  11. The Following User Says Thank You to 917601 For This Useful Post:

    Bockscar (16th September 2019)

  12. #7
    Senior Member
    Join Date
    Dec 2007
    Location
    Erewhon
    Posts
    207
    Thanks
    164
    Thanked 57 Times in 32 Posts
    Thanks for all the replies to this thread...still not entirely sure what the projectile in question actually is though, so I have asked my source if he has another example of the same, and if he has I shall section it so we shall know once and for all!
    Stay tuned.....

    Bockscar.

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top