maxwell smart
New Member
Would "F & L" on a H50 box relate to Fisher and Ludlow of Birmingham?
British Ordnance Collectors Network
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
H50 ammunition box manufacturer ID?
- Thread starter maxwell smart
- Start date
BruceLee230
Well-Known Member
Couple of H50s I've just bought from a local reclamation place. Left, a 1944 in good solid condition, missing a wire clasp. Right, a 1945 that hasn't fared too well. One hinge rusted through and the floor has a few holes. The third pic is the '44 which has slots on either side. I have another '44 exactly the same without slots. I paid what I thought was too much but found a 1943 dixie complete with all matching stamps, bargain!
I looked up VAL on Grace's Guide and Valor made ammunition boxes during the war so assuming they used VAL unless someone knows different.
I looked up VAL on Grace's Guide and Valor made ammunition boxes during the war so assuming they used VAL unless someone knows different.
BruceLee230
Well-Known Member
Hinges made for the 1945 H50. Just bolted on at the moment. Couple of holes on the bottom to plate and smaller ones filled with metal filler. Needs a skim of P38 filler all over to fill the rust dents.
BruceLee230
Well-Known Member
Another H50 VAL 1945 dated from the same reclamation place as the two previous.
Good, solid condition. Appears to be service brown though was it originally bronze green as the forth photo shows? This has slots near the handles and the other '45 I have doesn't.
Good, solid condition. Appears to be service brown though was it originally bronze green as the forth photo shows? This has slots near the handles and the other '45 I have doesn't.