Welcome to the Inert Ordnance Collectors.
Results 1 to 10 of 11

Threaded View

  1. #11
    Ordnance Approved
    Join Date
    Jan 2011
    Location
    Czech Republic
    Posts
    855
    Thanks
    1,257
    Thanked 686 Times in 360 Posts
    I have not more info on the KPS band manufacture.
    The FES bands were made of mixture of "granulated" and "mechanical" (mechanicaly manufactured) iron powder. The powder mixture is pressed with 2,4-3,0 tons per square centimeter. The resulting ring is then cooked at 970-1050 degrees Celsia for about 2 hours. The bands cool down in the owen to prevent rust. Then they are impregnated with parafine by inserting them to liquid parafine (70-80°C) for 20 to 30 minutes. Then the bands are packaged and sent of to be pressed onto the body. The temperature must not exceed 50°C during pressing and other manufacture proceses.
    The bands are protected from rust by coating.

    Bob
    any live or recovered ordnance shown in my posts was dealt with by trained EOD personnel

  2. The Following 2 Users Say Thank You to Nabob For This Useful Post:

    doppz92 (28th May 2020), HAZORD (28th May 2020)

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top