What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Whitehead War Nose Mk1

Dronic69

Well-Known Member
Premium Member
Evening all,

Here is a very interesting torpedo pistol - it is a Whitehead War Nose Mk1 which were produced in the 1890s.............

Apart from being relatively uncommon, this fuze is interesting for the following reasons:

1) Still has the original tin shear pin in place;
2) Still has it's original sealing washer;
3) Still has the copper disc base firing pin cover;
4) The direction arrow is on the opposite side from the norm;
5) and most interesting of all, it is stamped with a serial number #1 (stamped on both the body base and on the top of the firing pin)

Historic references indicate that this fuse was manufactured at two main locations - either the Whitehead Weymouth Factory in the UK, or from 1892 onwards under licence by E. W. Bliss Co. of Brooklyn, N.Y. In the same year the USN place an order for the manufacture of 100 Whitehead (3.55meters by 45 centimeters) Mk 1 torpedoes at a price of $2000 each with Bliss Co................

The current theory is the fuze may be associated with the initial USN order for the 100 x Mk1 torpedoes.

{Further, between 1896 and 1904, the Bliss Co. manufactured approximately 300 more Whitehead-developed units of five types for the U.S. Navy. The 3.55-meter Whitehead Mk 1, Mk 2, and Mk 3 torpedoes were basically the same, differing mainly in mechanical details. The Mk 1 and Mk 2 versions were also available in the 5-meter length}

As highlighted in the attached photos, the fuze required some careful "TLC" restoration........

Firstly, the removal of the totally rusted grub /retaining screws, clean out and re-tap (trust me they were rust welded imbedded!!!)
Secondly, involved the manufactured of 2 x replacement screws - one from a 1/4" whitworth bolt, the other using a smaller M4 bolt - these were the original screw threads.
Finally, involved cleaning the rust off the arming fan (impeller) and associated collar housing, initially soaked in vinegar to derust.

Fortunately apart from the rusty screws, the fuse was still fully functional prior to restoration and able to be armed after 23 revolutions of the impeller.

At least now it's back to a "respectable condition"!

Enjoy!

Cheers
Drew

BTW - I have absolutely no intentions of attempting to remove the shear pin in order to remove the firing pin!!! (LOL)
 

Attachments

  • War Nose Mk1.jpg
    War Nose Mk1.jpg
    117.8 KB · Views: 93
  • War Nose Mk1a.jpg
    War Nose Mk1a.jpg
    244.4 KB · Views: 96
  • 20200912_185252a.jpg
    20200912_185252a.jpg
    250.8 KB · Views: 87
  • 20200912_185222a.jpg
    20200912_185222a.jpg
    188.1 KB · Views: 85
  • Whitehead Mk 1 Pistol.png
    Whitehead Mk 1 Pistol.png
    93.6 KB · Views: 78
  • 20200911_192421a.jpg
    20200911_192421a.jpg
    90.2 KB · Views: 90
  • 20200912_185802.jpg
    20200912_185802.jpg
    96.8 KB · Views: 104
  • Comparison-2.jpg
    Comparison-2.jpg
    256.4 KB · Views: 118
Last edited:
Top