Can anybody helpme on a drawing concerning the powdercharge in the shellcase of a British 2 pounder APHE-T, clearly stating the type and shape of powder and the way it is packed in the shellcase?
Thanks in advance,
Regards, DJH
AP shell (APHE) was the standard 2 pdr anti tank shot originally before it was replaced by AP shot.
I mean the powdercharge in the shellcase of this shell.
Thank you,
Regards, DJH
Hi DJH,
The official designation for this round is as i learnt in the linked thread below many years ago is " Shell, Q.F., Armour-Piercing, 2-PR., Mark I " as the British did not use the term APHE.
Sorry that is all i can add to this thread, but it may help narrow down the search. Best Weasel
http://www.bocn.co.uk/vbforum/thread...light=pdr+aphe
Please use the SEARCH function
BOCN HELPING TO PROMOTE SAFE RESPONSIBLE ORDNANCE COLLECTING
RichardB (27th November 2020)
I found some info on this cartridge.
Thank you very much for the info, this is exactly what I am looking for.
Now only one question remains. what is Powder WT 144-048. Does is mean the powdersticks are 0.144 inch in dia with a 0,048inch hole through? So 3,65mm in dia with a 1,2 mm dia hole through.
Thanks in advance,
Regards, DJH
W T is Waltham, tubular and the two numbers do indicate external and internal diameters.
pzgr40 (27th November 2020)
Further to what ‘tankbarrel’ posted. If there are 2 digits for the diameter/dimension of the cord or propellant grain, then divide by 100 to get the diameter in inches. If there are 3 digits then divide by 1,000.
So W. T. 144-048 means:
W = 'Cordite W' = a type of solvent process-produced cordite that uses the stabiliser and gelatiniser carbamite (symmetrical diethyldiphenyl urea) & not mineral jelly, formerly known as R.D.H./A., the W is in reference to Waltham Abbey where is was developed;
T = Tubular cord;
144 = external diameter in inches divided by 1,000 = 0.144”(3.66 mm);
048 = internal diameter in inches divided by 1,000 = 0.048” (1.22 mm).
You may also see propellant referred to by a 'Size xx' or 'Size xxx'. As before divide by 100 or 1,000 depending on the number of digits.
For example Size 12, and Size 320. For the former its external diameter is 0.12" and for the latter 0.32".
Please note that Sizes 1-9 are divided by 100.
Last edited by Eggburt1969; 28th November 2020 at 10:12 AM.
greif (27th November 2020), pzgr40 (28th November 2020),tankbarrell (28th November 2020)
Bookmarks