Welcome to the Inert Ordnance Collectors.
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 45
  1. #1
    UBIQUE
    Join Date
    May 2007
    Location
    ENGLAND
    Posts
    4,294,967,271
    Images
    113
    Thanks
    1,628
    Thanked 1,889 Times in 715 Posts

    German B1 incendiery bomb

    cutaway pictures and information courtesy of PzGr40
    Cutaway model of a WW2 German B1-EL incendiary cluster bomb.

    The B1-EL is the simpelest of a series of light incendiary cluster- and dispenser bombs of which the body is made of Elektron and whom have a thermite filling.
    The bomb comes in a variaty of types, other types have a small explosive charge placed to the base (B1-EL ZA) or in the Nose fuze (B1-EL ZB), either modifications in the fuzing system. There are also various types in the 1,3 and 2 kg series that are pending on the same principal design.

    Build up of the bomb:
    The body of the bomb is an Elektron (92% Magnesium + 5% aluminiun + 3% zinc) piece of pipe, tapered at the base, and internally threaded to receive the base plug. The Top of the body is internally threaded to receive the Fuze AZ.13. Near the top of the body, six holes are drilled as an initial flame escape.
    The tail is a three piece (pressed - spotwelded) metal sheet assembly that fits over the tapered base of the bodt. It is held in place by three small rivets.

    The fuze used is the AZ 13 (also called AZ.8312). It is a simple impact fuze with no safety features. Before loading the bomb into the Clusterbomb or dispenser, a safety pin is to be removed (hole on right). At impact the inertia block, housing the firing cap (red)overcomes the spring, pushing the firing cap into the firing pin. The body of the fuze is Elektron, the inner parts of the fuze are brass made.
    Earlier types of AZ.13 had a steel body.

    Above the fuze , a split collar spacer is placed (ring with holes), above it a disc spacer is placed. On top of these two a disc with a small detonator (yellow) is placed that is used to ignite the thermite. The collar spacer enshures the flames can leave the holes through the side of the bomb after ignition. The holes are (off factory) plugged of with wax and a piece of tape goes round the body ??over the holes- to enshure the bombs are moisture proof (thermite is very sensitive to moisture)

    Functioning of the bomb:
    If the bomb falls to the ground, nose down, the firing cap hits the firing pin. The flame of the firing cap (red) ignites the small detonator (yelow), which on its turn ignites the main charge of thermite. First, the flames will appear from the holes in the side, however soon the whole elektron body and fuze will catch fire.
    A fire of Thermite and the elektron body burns very hot, appr. 2000 degr celsius and is difficult to extinguish. Using water to extinguish the bomb will make the bomb burn more fierce.

    Weight of the bomb : 1 kg.
    Diameter of bomb : 50mm.
    Length of bomb : 350mm.
    Filling : 680 grams of thermite

    A B1-EL dropped from 2000 mtrs height is able to penetrate 5cm of reinforced concrete. However I suppose this data only counts for the older type of B1-El that had a steel nose fuze body.
    The bomb was meant to be used in build up areas and industrial areas.

    It was used in the bombs and dispensers: AB 42 , AB 70D1, AB 250-2 (224 pcs), BSB 360/700/1000 container (320/570/702 pcs), AB 500-1 (392 pcs), ABB 500 (133 pcs).
    During production of the cutaway model it occured to me that the spring that keeps the firing cap away from the firing pin is quite strong. Therefore, an impact of considerable speed is required to enshure ignition. There must have been quite a number of duds.

    Any Live or Dug ordnance shown by me has been disposed of by military EOD personnel .


    Site administrator. damned if i do..damned if i dont


    BOCN HELPING TO PROMOTE SAFE RESPONSIBLE ORDNANCE COLLECTING


  2. The Following User Says Thank You to spotter For This Useful Post:

    Nismosonic (18th January 2017)

  3. #2
    UBIQUE
    Join Date
    May 2007
    Location
    ENGLAND
    Posts
    4,294,967,271
    Images
    113
    Thanks
    1,628
    Thanked 1,889 Times in 715 Posts

    Re:German B1 incendiery bomb

    detail of the fuze

    Any Live or Dug ordnance shown by me has been disposed of by military EOD personnel .


    Site administrator. damned if i do..damned if i dont


    BOCN HELPING TO PROMOTE SAFE RESPONSIBLE ORDNANCE COLLECTING


  4. The Following User Says Thank You to spotter For This Useful Post:

    Nismosonic (18th January 2017)

  5. #3
    UBIQUE
    Join Date
    May 2007
    Location
    ENGLAND
    Posts
    4,294,967,271
    Images
    113
    Thanks
    1,628
    Thanked 1,889 Times in 715 Posts

    Re:German B1 incendiery bomb

    two different types,note the fuzes and one has the gain in the ail end

    Any Live or Dug ordnance shown by me has been disposed of by military EOD personnel .


    Site administrator. damned if i do..damned if i dont


    BOCN HELPING TO PROMOTE SAFE RESPONSIBLE ORDNANCE COLLECTING


  6. The Following User Says Thank You to spotter For This Useful Post:

    Nismosonic (18th January 2017)

  7. #4
    UBIQUE
    Join Date
    May 2007
    Location
    ENGLAND
    Posts
    4,294,967,271
    Images
    113
    Thanks
    1,628
    Thanked 1,889 Times in 715 Posts

    Re:German B1 incendiery bomb

    container,several types were produced

    Any Live or Dug ordnance shown by me has been disposed of by military EOD personnel .


    Site administrator. damned if i do..damned if i dont


    BOCN HELPING TO PROMOTE SAFE RESPONSIBLE ORDNANCE COLLECTING


  8. The Following User Says Thank You to spotter For This Useful Post:

    Nismosonic (18th January 2017)

  9. #5
    Senior Member
    Join Date
    Jun 2007
    Location
    Lancashire,England
    Posts
    5,431
    Thanks
    445
    Thanked 101 Times in 53 Posts

    Re:German B1 incendiery bomb

    :woohoo: Superb information,excellent diagrams and a beautiful sectioned Bomb!
    Hats off to you on that Spotter.

    best

    w.

  10. #6
    Senior Member
    Join Date
    Jun 2007
    Location
    Lancashire,England
    Posts
    5,431
    Thanks
    445
    Thanked 101 Times in 53 Posts

    Re:German B1 incendiery bomb

    I always thought the AZ13 fuze was a steel tile-breaker and the AZ83 made of aluminium?
    I have an example of both and they are def made of different materials.

    best

    w.

  11. #7
    Member
    Join Date
    Jun 2007
    Posts
    47
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re:German B1 incendiery bomb

    wow, that's why you asked on the ww2 forum with great speed info on the carrier, great cut.

  12. #8
    UBIQUE
    Join Date
    May 2007
    Location
    ENGLAND
    Posts
    4,294,967,271
    Images
    113
    Thanks
    1,628
    Thanked 1,889 Times in 715 Posts

    Re:German B1 incendiery bomb

    The cutaway is also by PzGr40,he makes lots of excellent cutaway ordnance,with the easy to understand in depth descriptions on each item he does.
    The reason i asked on wk2 was we have found one at work (location witheld,and item has already been destroyed)which i identified due to the liklihood of others been in the area ,i also wanted to know about the containers that they were released from,to give me some idea how many more there could be.The response to my request was great from the lads on wk2 and from our own andyd

    pic of item as found ,as you can see not a mint collectors piece,some markings remain on the fuze section

    Any Live or Dug ordnance shown by me has been disposed of by military EOD personnel .


    Site administrator. damned if i do..damned if i dont


    BOCN HELPING TO PROMOTE SAFE RESPONSIBLE ORDNANCE COLLECTING


  13. #9
    UBIQUE
    Join Date
    May 2007
    Location
    ENGLAND
    Posts
    4,294,967,271
    Images
    113
    Thanks
    1,628
    Thanked 1,889 Times in 715 Posts

    Re:German B1 incendiery bomb

    remnants of markings on the fuze end

    Any Live or Dug ordnance shown by me has been disposed of by military EOD personnel .


    Site administrator. damned if i do..damned if i dont


    BOCN HELPING TO PROMOTE SAFE RESPONSIBLE ORDNANCE COLLECTING


  14. #10
    Senior Member
    Join Date
    Jun 2007
    Location
    Lancashire,England
    Posts
    5,431
    Thanks
    445
    Thanked 101 Times in 53 Posts

    Re:German B1 incendiery bomb

    Great pics,what was this doing at the location though?
    had it been dropped there or was it there for years awaiting disposal?

    cheers

    w.

 

 
Page 1 of 5 123 ... LastLast

Similar Threads

  1. my German Bomb fuses
    By Jimbo in forum Members Collections
    Replies: 1
    Last Post: 2nd July 2014, 10:25 PM
  2. my German Bomb fuses
    By Jimbo in forum Members Collections
    Replies: 1
    Last Post: 20th September 2010, 08:05 PM
  3. my German Bomb fuses
    By Jimbo in forum Members Collections
    Replies: 0
    Last Post: 13th April 2008, 11:47 PM
  4. my German Bomb fuses
    By Jimbo in forum Members Collections
    Replies: 0
    Last Post: 13th April 2008, 11:46 PM
  5. German Bomb Fuze (80)
    By Fuzeman in forum Bomb Fuzes, Pistols etc
    Replies: 6
    Last Post: 3rd April 2008, 12:01 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top