This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
That's going to be the hell of a job. You'll first have to sandblast the loose parts SA2,5 inside and out, spray it in zincprimer, apply glass fibre sheets to close the holes, polyester and sandpaper the outside smooth and paint it. A new fuze would not be a luxery.
I'm waiting for the results......
By than you'll have quite a rare piece for your collection.
Regards, DJH
the first it must be on a big fire tu unsrcew the bottom part of the head, then i weld it together with the upper part.
i will see if i blast them or use the angle grinder or both. no glass fibre, no plastics - im a body maker! i will weld the wholes with steel sheets, buckling the upper part, maybe i tin-plate some deep crates, primer is a combined alu/zinc spray, using a fine disc and the angle grinder to glad the outside a little bit i think, i only need drawings and the colours
ps: did you need one for cutting, only around 90kg emtpy
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.