Question for the landmine guys ... I have a picture of a MON-100 / PKC-7. What is the difference between the two? I have seen both nomenclatures of these mines. I think they are two different mines, but I can't find anything to prove me right. Does anybody have any documentation on this.
Any ideas?
Joe
P1120236.jpg
Is that an actual mine or a copy made for training purposes? (by Miltra or all those others)
I think its a training mine. But I am not sure ... But if you look in Janes, the cutaway image has the same nomenclature on it. I am wondering if it is from another country? I know these are copied by several countries. I just found it interesting that Janes doesn't discuss the different nomenclatures on it.
I think there are two different mines, just because of the nomenclature, not for any other reason. I have seen export models have English nomenclatures instead of Chinese or Russian, but the two don't match up ... then again maybe they don't have too.
But hey, if nothing else, its good for discussion.
Joe
Last edited by jvollenberg; 20th January 2012 at 11:39 PM.
Hard to say now since copies might be in the game. Often copies do not bear the correct markings due to many reasons. The MON-100 itself as well as the overall design was, as you surely know, copied by several countries.
But again, if that one is a copy I would not waste any more time on trying to ID it.
A few file photos of my Vietnam MON 100.
___HAZ/
_____/ORD Hazardous Ordnance Recognition
________Saving Lives Through Education
The ones that were used in Vietnam were called Chinese Claymores. SOG did run into them during their excursions across the fence. RT Vermont ran into one with a long string attached to something they didn't know while deep into Laos. Thinking that the NVA woud never mine their own area, one of the yards pulled the string which was attached to a Chinese claymore hidden just a few meters away. BAM, instantly they lost half of the team. The VC also made those mines. They used chunks of small rebar as their fragmentation. Just FYI.
Last edited by V40; 21st January 2012 at 05:53 PM.
V40
Mark
MACVSOG Living Historian"
SOG weaponery and Ordnance Historian
any live ordnance shown in my posts was dealt with accordingly by trained qualified professionals
"Never start a fight that you can't win with everything you have right now" By Sergeant Joe Walker, 10 (One-Zero) of RT California, Vietnam.
Looks russian (technical control signs):
PICT0036.jpg
But, usually the mine's type is written on the wall, like here:
PICT0035.jpg
I've never seen RKS-100 signing.
http://www.cmac.gov.kh/mine_category...ntation%20Mine
Here is another one marked with the PKC-7 marking. Does anyone know what the OTK in the triangle stands for?
Joe
Bookmarks