Reply With Quotebeihan62 (6th July 2012), Fjordhouse (9th July 2012),
Welcome to the Inert Ordnance Collectors.
Results 1 to 8 of 8
Thread: Look What I made! Holzmine 42.
-
6th July 2012, 09:05 PM #1Member
- Join Date
- Feb 2010
- Location
- Pennsylvania
- Posts
- 37
- Thanks
- 13
- Thanked 6 Times in 2 Posts
Look What I made! Holzmine 42.
I built a Holzmine 42. Please be be gentle with me! I'm sill working on it. How bad is it?
Matt.Last edited by Weasel; 6th July 2012 at 11:20 PM.
-
The Following 5 Users Say Thank You to 596th aec For This Useful Post:
-
6th July 2012, 09:46 PM #2Premium Member
- Join Date
- Jul 2010
- Location
- Ukraine
- Posts
- 304
- Thanks
- 52
- Thanked 98 Times in 48 Posts
Nice!
If you want, I can give three picture with different wariants how germans made this mine unremove.
-
7th July 2012, 11:15 AM #3Premium Member
- Join Date
- Feb 2008
- Location
- UK
- Posts
- 581
- Thanks
- 69
- Thanked 64 Times in 37 Posts
Very nice box you made. I would'nt mind the recipe of the sizes and measurements if you have them. Ivan i would be very intrested to see the different variants.
-
7th July 2012, 12:42 PM #4Premium Member
- Join Date
- Jul 2010
- Location
- Ukraine
- Posts
- 304
- Thanks
- 52
- Thanked 98 Times in 48 Posts
Variants from East Front.
Originally Posted by BMG50
1. In floor opposite pin fuze make hole. One end wire to pin, another end wire - to wooden stake in ground under mine. When you move mine - bom!
2. In the front wall hole. One end wire to pin, another end - to floor. When you try to take away booster and fuze - bom!
3. Wire attach to push pad. When you try to take away booster and fuze - bom!
Variants.jpg
-
The Following 3 Users Say Thank You to Ivashkin For This Useful Post:
596th aec (8th July 2012),
BMG50 (7th July 2012), Panzerknacker (10th July 2012)
-
9th July 2012, 10:17 PM #5Member
- Join Date
- Feb 2010
- Location
- Pennsylvania
- Posts
- 37
- Thanks
- 13
- Thanked 6 Times in 2 Posts
Can Do! Mine 13x12x4 inches. Do you want the Internal dimensions as well? Originally Posted by BMG50
-
11th July 2012, 01:10 PM #6Premium Member
- Join Date
- Feb 2008
- Location
- UK
- Posts
- 581
- Thanks
- 69
- Thanked 64 Times in 37 Posts
The internal dimentions would be great, many thanks.
-
12th July 2012, 09:57 PM #7Senior Member
- Join Date
- Mar 2008
- Posts
- 104
- Thanks
- 66
- Thanked 13 Times in 9 Posts
Hey Matt,
That is a nice mine,
Any chance you can post the drawings?
Regards
Bart
-
15th July 2012, 12:38 AM #8Member
- Join Date
- Feb 2010
- Location
- Pennsylvania
- Posts
- 37
- Thanks
- 13
- Thanked 6 Times in 2 Posts
Originally Posted by wemme
Thanks!
This is what I used. I modified the some of the measurements.
two partitions 1/4 x 7 7/8 x3 3/4
Two partitions nearer the shearing flange 3/8 x5 x3 3/4
Size of shearing flange 1/4 x 7 1/2 x 1
http://www.lonesentry.com/ordnance/h...-box-mine.html
if any ones needs help let me know!
-
The Following User Says Thank You to 596th aec For This Useful Post:
wemme (15th July 2012)
Bookmarks