This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have some lead bullets such as a Brunswick Belted Ball, 480gr Westley Carbine, 530 gr Metford but they are fairly badly oxidised. The question is do I clean them, and if so what with? Any views, comments or advice would be appreciated.
Hi John,
Always difficult to clean ore not to clean. Lead is verry hard to clean without grinding (use steel wool 000). I crease my lead bullets with acid free petroleum jelly to preserve them.
Caution lead withe ore lead oxidation is verry poisonous so where a mask.
Stopping lead oxidation is a nightmare for museums as well. About the only thing that can be done is to gently remove any surface oxide dust and then attempt to seal the lead with something. There are specialised waxes one can use, but for a small collection I would think any preservative wax would help. At least it is better than nothing.
have you tried putting the bullets,not the cases,in vinegar for a couple of hours then wash off with a soft toothbrush?....I must admit I haven't tried this with lead but it works well with zinc and other alloys...hmmm got an old oxidized lead bullet I'll give it a try and let you know :tinysmile_shy_t:
You also need to find an alternate place to store your cartridges. Most wood cabinets and/or shelves are very bad for lead bullets. Even cartridges that are in their original cardboard boxes or cartons will eventually get frosty. The same for many paper products like corrugated cardboard. The use of metal or plastic storage units and acid-free paper is recommended by most cartridge collectors.
Get some brass or bronze wool to clean the outside. A good application of a paste wax will often help.
Thanks for this info Ray. I've recently obtained a metal "Bisley" cabinet and some plastic trays to store my collection in. I'll try the bronze wool and wax as well.
be sure any wax containing acid's will make things whorse on the long therm. the same with vinager (claening) and wood ore paper products (storing). finishing the bullet with some kind of (nail) polish ore clear paint can help closing it of from the air but looks horribel.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.