Deacon Jim (10th June 2022), Sir Roger (24th October 2013), Sprockets (25th February 2021)
Hi all
Long time since i posted anything but should be posting a bit more in the near future... busy busy.
Can anyone supply the sizes for the T shaped brass detonator housing that is inside the Tyreburster?
Height, Width etc.
Thought i'd ask if anyone had a spare housing but i guess i know the answer to that
I have made a copy of the donut charge that is inside.
I made up a mould so if anyone needs a plaster copy get in touch (i'll post some pictures of the finished copy soon)
Here is a Picture of the copy charge in place with correct green cloth tape around it.
Dummy charge.jpg
All the best
And thanks for any help
T42
Last edited by turpin42; 16th October 2013 at 01:17 PM.
Deacon Jim (10th June 2022), Sir Roger (24th October 2013), Sprockets (25th February 2021)
I am a little late but here goes. The weight without detonators is 8 gram. The height of the spring housing is 18,2mm, the outside diameter of the spring housing is 14,4mm, the outside diameter of the detonator pockets is 9,5mm and distance between the detonator pockets is 22mm. The slots for the shear wire are 1,6mm wide and the height is 11.8mm.
I would like to see a photo of the copy.
"All live or dug ordnance shown in my posts has been dealt with by qualified EOD personnel"
Hi Anders
Thanks for the sizes!
Heres a Picture of a finished painted copy of the charge.
TB copy.jpg
All the best
T42
Hi Anders
Send me a PM With Your address and we will sort i out
All the best
T42
This is on eBay - not sure if it’s the right thing or not
https://www.ebay.co.uk/itm/Extremely....m46890.l49292
Sent from my iPhone using Tapatalk
yes its totally correct
I didn't see the ebay link in time to view the item. Still looking for original or reproduction inert tyreburster.
Looking for / Suche noch:
-8,8cm Pzgr.40.
-8,8cm D (drahtsperre)
Bookmarks