What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

AN-M103/A1 box fin dimensions

DEADLINE222

Well-Known Member
My calipers are not present and it has been a long day, so hold the FLAK. :tinysmile_kiss_t4:

As the fin pictured has been around the block a few times, these measurements are not intended to be utilized as life saving devices, but rather a place to turn for the desperate fabricator and/or restorer.

I felt the need to put out a bit.

Others feel free to join in with refinements.

Enjoy.

*Constructed with 1/16 inch thick steel.

*This is an original, service modified specimen; modified to M125A1. The hole in the cup is much wider that the original ANM-103.

889900.jpg

ANM-103 is for GP, 100 pound M-30, ANM-30(A1). *YELLOW*

0011122.jpg

M125A1 is for Bomb, Photoflash M120(A1). *GREEN*

Image showing holes for drag plate. (Holes filled in previous image.)

Big holes are 5/16'' in diameter. Small hole is 1/8" in diameter.

These three holes are present on all four braces/sides.

222333114.jpg
 
Last edited:
Top