Having collected SD 2 butterfly bombs and their fuzes for a number of years I have come across 2 main types of 67 timed fuze. The ones I'm going to call the "standard" type and the ones with the "dummy switch". I have come across 5 of the dummy switched variety, 4 from old British collections in good condition but in the last month 1 ground dug one from Latvia.
The following show some of the differences between the 2 types.
If anyone has any further information about the dummy switched types/why they were used etc then I'd be interested in hearing from you.
Top view. Standard to the left, dummy switched to the right. Note also that the fixing screws protrude through the top of the standard type but do not on the dummy switched type.
Close up to show dummy switch. All observed to date have the "switch" in this orientation.
Top view of recently Latvian found fuze with dummy switch next to good condition fuze with dummy switch from old UK collection.
Side view of the last photograph. Recently found Latvian fuze with dummy switch shown to the left. The case has broken off to expose inner workings.
Bottom view of fuzes, the standard to the left and the one with the dummy switch to the right. NOTE the orientation of the "67" on the upper face is in the same direction, screws and det spring channel are in differing orientation to the base.
All are INERT.
Last edited by SG500; 27th December 2016 at 02:09 PM.
Could it be that the dummy switch is there to confuse anybody brave enough to creep up for a closer look? (Like they did on "Danger UXB" - Episode 10 - "Butterfly Winter".)
Or used up old parts? Because i know dummy switches only from early ones
Prompted me to check my collection Dave. I do not have the ones with dummy switch. I would guess they are early parts to use up,which came in handy to confuse BD personel at the same time?
waffenamt (19th January 2017)