Welcome to the Inert Ordnance Collectors.
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Mar 2016
    Location
    UK
    Posts
    11
    Thanks
    7
    Thanked 2 Times in 2 Posts

    Vickers Projectile (VSM)

    Hi,

    Can anyone help with information on this projectile please. Anything you can tell me about it would be very much appreciated! (it'd be great if someone has a cutaway version or diagram to see it's construction, etc.). It is obviously unfired as the driving band is intact.

    Can the age be determined by the very few markings or any other distinguishing features?

    It appears to be permanently fixed to the brass base / plinth which has been added (not sure how it is attached as there are no visible means of fixing and doesn't seem to be screwed on...?)

    It is approx 6.5 inches (16.5cm) tall with a diameter of 1.9 inches (4.8cm).

    Thank you!

    VSM 1 Low.jpgVSM 2 Low.jpg
    Last edited by Malmaison; 19th April 2017 at 09:19 PM.

  2. The Following User Says Thank You to Malmaison For This Useful Post:

    doppz92 (19th April 2017)

  3. #2
    Senior Member
    Join Date
    Feb 2008
    Location
    UK
    Posts
    2,113
    Images
    34
    Thanks
    1,004
    Thanked 406 Times in 217 Posts
    Hi Malmaison,
    It looks to be a 47mm / 3pr projectile, i would suggest it has been fixed to the plinth via a bolt to the base that may of been threaded for a base fuze.
    Best regards Weasel.
    Last edited by Weasel; 19th April 2017 at 11:28 PM.
    Please use the SEARCH function


    BOCN HELPING TO PROMOTE SAFE RESPONSIBLE ORDNANCE COLLECTING


  4. The Following 2 Users Say Thank You to Weasel For This Useful Post:

    doppz92 (19th April 2017), Malmaison (20th April 2017)

  5. #3
    Junior Member
    Join Date
    Mar 2016
    Location
    UK
    Posts
    11
    Thanks
    7
    Thanked 2 Times in 2 Posts
    Thanks Weasel,

    I think you could be right about the brass base having a thread / bolt. I did wonder if that could be how it is secured...I tried really hard to unscrew the base but it doesn't move at all (possibly through years of not moving...or could it be a reverse thread and I have actually been turning it in the opposite direction?).

  6. #4
    Premium Member
    Join Date
    Mar 2009
    Location
    U.S.
    Posts
    3,919
    Thanks
    374
    Thanked 873 Times in 503 Posts
    The age of your projectile can only be estimated. Vickers, Sons & Co. merged with Maxim Nordenfelt Gun and Ammunition Co. in 1896 to form Vickers, Sons & Maxim. The use of the VSM stamp on casings has been observed from 1901 to 1928.
    ___HAZ/
    _____/ORD Hazardous Ordnance Recognition
    ________Saving Lives Through Education

  7. The Following User Says Thank You to HAZORD For This Useful Post:

    Malmaison (20th April 2017)

  8. #5
    Junior Member
    Join Date
    Mar 2016
    Location
    UK
    Posts
    11
    Thanks
    7
    Thanked 2 Times in 2 Posts
    That's excellent! Thank you Hazord.

  9. #6
    Premium Member
    Join Date
    May 2015
    Location
    Southend on Sea
    Posts
    362
    Thanks
    466
    Thanked 424 Times in 165 Posts
    Usually, fuzes, tracers, igniters etc. which screw into the base of a projectile are left hand threaded so that they do not unscrew on firing.

  10. The Following User Says Thank You to AE501 For This Useful Post:

    Malmaison (21st April 2017)

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top