What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Today, found this French 47mm as Trench Art, now restored

G

Gspragge

Well-Known Member
Premium Member
It had the usual nonsense soldered to it and the lip of the case was sort of Petalled out, but not too far.
I was able to bring it around to it's original state.
 

Attachments

  • IMG_0002 5.JPG
    IMG_0002 5.JPG
    179.1 KB · Views: 97
  • IMG_0003 2.jpg
    IMG_0003 2.jpg
    60.1 KB · Views: 96
Falcon said:
How did you remove the solder from the brass?
Click to expand...

You can remove virtually all traces of solder on brass with a butane torch and some coarse cotton rag. Heat the solder until it starts to melt and quickly and firmly rub the molten solder off with the rag. Do not use synthetic fabric as it will melt and stick to the brass. You may have to reheat a couple of times to remove all but a very thin trace of solder. The residue can then be removed by polishing.

gravelbelly
 
You must log in or register to reply here.
Top