What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

British Mk IV Mine?

EnfieldMills

Well-Known Member
Hello,

I have had this British AT mine for a few years. I believe its the Mk IV.
Sadly it is missing its lid. It came with a 1939 dated transit plug in the centre.

Would anyone happened to have some pictures of what the fuze and lid would look like?
As in the best of worlds, it would be nice to complete it one day.

Cheers,
Luke.

20161102_202952.jpg20161102_202959.jpg20161102_203008.jpg
 
With those securing pins it can only be a Mine Contact AT Mk II ( this is its designation in 1942, GS must be a later more specific identifier in non service manuals).
The sorbo ring which is 1" deep with O.D. 2.125" is issued separately from the mine in packages marked 'For Mark II Mines' (ACI 526/41) and was inserted to stop transmission of shock to the fuze when adjacent mines functioned.
These rings were also originally for use with Mine Mk IV but this was discontinued at this time due to the far greater pressure required to operate the mine.
 
Last edited:
Top