What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

12.8cm Flak 40 case

SG500

Well-Known Member
Premium Member
Well I guess some of you will have seen this from specialist auctions over the last few weeks and yes I finally caved in and went for it, I do like a challenge so this ones a bit of a long term restoration project.

To help with the restoration can anyone tell me what the original finish on the case would be. Is is brass washed steel? I've never seen one of these in good original condition so if anyone has one they can take a photo of it would be appreciated.

The gun fired a 27.9 kg (57.2-pound) shell at 880 m/s (2,890 ft/s) to a maximum ceiling of 14,800 m (48,556 ft).

I've attached a few photos of the case just to show how large it is. It makes the 88mm (in the background) look small and gives the 155mm projectile a run for its money.


Dave.

007.jpg009.jpg
 
According to ammo manual L.Dv.4402/7 12,8cm cases were made both of brass and steel. Surface treatment of steel cases is not mentioned but I assume they have to be either brass washed or parkerized - not lacquered because the electric primer cirquit needs a contact from chamber to case.
 
According to ammo manual L.Dv.4402/7 12,8cm cases were made both of brass and steel. Surface treatment of steel cases is not mentioned but I assume they have to be either brass washed or parkerized - not lacquered because the electric primer cirquit needs a contact from chamber to case.

Ooooooo now a brass one would be a very nice case indeed. Thanks Reino.
Dave.
 
Top