What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

90MM - 57MM asstd.

Slick

Well-Known Member
Still chippin' away at getting pics of the big bullet lot. Here is a variety, less the WW1 vintage 75s, that I could assemble, seperate from the cases they were stuck in. Mostly, literally. There were a few, such as the other 90MMs, that were impossible to remove. Some are crimped in, others just stuck. I'm having to rest after this endeavor.

Let me know if there are any that need closer inspection.

Rick

IMG_0553 (1280x679).jpg IMG_0554 (1280x770).jpg IMG_0555 (1280x696).jpg IMG_0558 (1280x446).jpg IMG_0564 (1280x722).jpg

And, anyone want to take shot at IDing the next to last? The black one?
Hint: 3"
 
Last edited:
WAG Photo 1 L-R: 57mm AP-T, 3 inch 50 cal Navy HE, 75mm M72 SHOT-T, 3 inch 50cal AP (old), 3 inch Seacoast Gun Mk 7 TP, 90mm Gun M77 SHOT-T, Unknown, 90mm M71 HE.

The tall 90mm is a mystery. What diameter is it?

The next to last black one is 3 inch 70 cal.
 
Last edited:
HAZ

You're too good. WE HAVE A WINNER! Already.

Tall 90MM? Projectile or round?
 

Attachments

  • IMG_0560.jpg
    IMG_0560.jpg
    97 KB · Views: 24
Last edited:
The projectile just left of the 90mm M71 in photo 1. Small rotating band (lower velocity), but taller than the M77 SHOT to its left.
 
Rick,

Could it be 91-92mm? 3.6 inches is 81.44mm, and it would fit into the age of a 3.6 inch. Its old, due to the rotating band, and it isn't a Navy size.

You should have had the ID contest on this one!
 
Last edited:
What is the length of the 3.6 inch? I have an unfired one, with a threaded fuze hole in the base just like yours.
 
John

91.4MM (3.6")

OAL 298MM (11.75")

Paint is dark green. And has been on there for awhile.

Rick
 
U.S. 3.6 inch field gun the mortar, they used the same projectiles. Spanish American War era. Bag gun. Here is the Mortar:

http://rememberthemaine.com/?wpsc-product=3-6-inch-us-army-m1892-mortar

From internet: excerpt

UNITED STATES. The field gulls proper in the United States service arc the 3.2-inch gun, the 3.6-inch gull, and the 3.6-inch mortar (see ac companying table). The 3.6-inch gun is a breech loading ride of greater weight and power than the 3.2-inch gun, which latter is more especially adapted to the service of the horse-artillery arm. The gun is essentially the same, as to form and characteristics, as the 3.2-inch gun, weighing 1181 pounds and using a 20-pound projectile. The 3.6-inch breech-loading field mortar for vertical fire is used to reach troops protected by intrenchments or otherwise from the direct tire of the field guns. It fires the same projectiles as the 3.6-inch field gun, and has an extreme range of about two miles. Reduced charges are used for the shorter ranges. The mortar weighs 2-14 pounds, and uses a charge of 15 pounds of powder with a 20-pound projectile.
The United States has 30 batteries, six guns each, of field artillery, being about 2.4 guns per 1090 men in the army.
Extensive tests of field-artillery material were held in 1902. The choice of weapons narrowed to a gun of the United States Ordnance Depart ment, invented by Captain Wheeler, United States Army (see ORDNANCE), and the famous Ehrhardt gun, brought out by an amalgamation of German firms with headquarters at Diissel batteries of these guns. illore recently Norway ordered 22 of these batteries. The Ehrhardt gun caused Switzerland to hesitate when almost nn the act of rearming her field artillery with Krupp guns. German:, and Austria made ext•n sive tests of these guns, and Krupp, Schneider Canet, and Saint Chamond have all produced 'long recoil' carriages in place of former designs. The Ehrhardt carriage is composed of two parts —the lower, which includes the wheels, axle, and telescopic trail, and the upper, which includes the U-shaped cradle which contains the hydraulic spring buffer, allowing of about 47 inches recoil.
 
Last edited:
Top