British Ordnance Collectors Network
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Fuze Nose Perc L160 A1 tin question
- Thread starter AndyD
- Start date
If the tin is the Cylinder 719 then you need the F632
If the poly insert you have has 12 holes then its just the one layer.
You might want to look out for the bits that go inside the 719. I don't know specifically which ones you need for your L160 but typically these tins have a white rubber ring with an internal tab. A black rubber insert that fits around the shoulder, half way down the cylinder. A metal collet that fits over the black rubber and a white styrene bung. The tin has an internal metal lid with a rubber sealing washer fitted and a small rubber grommet.
You might want to look out for the bits that go inside the 719. I don't know specifically which ones you need for your L160 but typically these tins have a white rubber ring with an internal tab. A black rubber insert that fits around the shoulder, half way down the cylinder. A metal collet that fits over the black rubber and a white styrene bung. The tin has an internal metal lid with a rubber sealing washer fitted and a small rubber grommet.
Last edited: