Derek
Well-Known Member
I have been experimenting with various ways of removing paint and after trying several methods I found that by using a product called MODELSTRIP I achieved great results, take a look at this No. 5 Mills that was covered in a thick layer of green over gold metallic; http://www.bocn.co.uk/vbforum/threads/82327-No.-5-Mills-any-comments.
Modelstrip is used for removing paint from plastic models so it is not harsh and it works well on metal too. Just brush it on, leave the item in an airtight bag for about 8-10 hours and then scrub off with a stiff brush under running water. The good thing about this product is that it just takes the top layer of paint off so you can control just how far to go. On my Mills I was able to see remains of the original finish after treating it with Modelstrip twice.
You can get the product here; http://www.wonderlandmodels.com/products/modelstrip-modelstrip/ or from Hannants.
Check it out!
Cheers,
Derek
Modelstrip is used for removing paint from plastic models so it is not harsh and it works well on metal too. Just brush it on, leave the item in an airtight bag for about 8-10 hours and then scrub off with a stiff brush under running water. The good thing about this product is that it just takes the top layer of paint off so you can control just how far to go. On my Mills I was able to see remains of the original finish after treating it with Modelstrip twice.
You can get the product here; http://www.wonderlandmodels.com/products/modelstrip-modelstrip/ or from Hannants.
Check it out!
Cheers,
Derek