satan18
Well-Known Member
Now i have the materials to start my 500 restoration
i thought i would start by removing the nose cone.
carefully grinding out the welds and back to the original rebate
i was able to get the body away clean.
The donar tube is 6mm under sized and i aim to use the plasma cutter
to open the donar tube up along the lengh and allow it to fit into the rebate on the cone.
next stage is to remove the back end complete.
i thought i would start by removing the nose cone.
carefully grinding out the welds and back to the original rebate
i was able to get the body away clean.
The donar tube is 6mm under sized and i aim to use the plasma cutter
to open the donar tube up along the lengh and allow it to fit into the rebate on the cone.
next stage is to remove the back end complete.