This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi, Came across this today it is 23.5 inches long and 8 inches in diameter and the fuze well is about 7.7 - 8 inches deep, any information would be great.
A bit rusty and pitted but heavy and solid, probably weighs between 20 - 25kgs.
Richard
There were I believe different types of construction,
body length of SC 50 appears to vary between 670 to 766 mm
body length of SD 50 appears to be 590 mm
the other thing that also appears to me to make this one a SD50 rather than an SC50 is the ring to the rear of the bomb. The fins would attatch to this. The fins of an SC50 have the screw holes almost at the edge of the fins, the SD50 on the other hand has a sleeve that fits over the bomb casing and the screw holes used to attatch the fins are some way down this sleeve. This points also to it being an SD50......however, I may be wrong, so interested in what others think?
Bender, Thank you for that, nice diagram and tells me all I wanted to know, My friend Kev is going to get it an x-ray just to be sure all is well and then it will at some stage in the future get a bit of a makeover.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.