What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Siluro A100 450 x 5.25, Testa carica

B

Bjorn

Active Member
Picked up this small plaque a week ago, to my understanding it related to a Italian torpedo.
I cant find much information seeking online, does anyone have any information or know anything else about this A100 torped or where this plaque could have been mounted I would greatly appreciate it

The modell Torpedo is a typ 41 Swedish torpedo

DSC04105.jpgDSC04107.jpg

Cheers!
 
The Siluro A100/450x5,25 was a Regia marina torpedo for submarines, introduced in 1914, made by the Ernesto Breda Company.
Siluro A100.jpg Apparecchio motore per siluro A 100 con dispositivo per il lancio angolato.jpeg
Another slightly shorter version the Siluro A100/450/5 W MAS was introduced in 1923 (though its manual is dated 1928) for rapid torpedo boats (MAS) and had a speed of 44kn and a range of 2.000m. It was made by Whitehead.
 
Dreamk said:
The Siluro A100/450x5,25 was a Regia marina torpedo for submarines, introduced in 1914, made by the Ernesto Breda Company.

Another slightly shorter version the Siluro A100/450/5 W MAS was introduced in 1923 (though its manual is dated 1928) for rapid torpedo boats (MAS) and had a speed of 44kn and a range of 2.000m. It was made by Whitehead.
Click to expand...


Thank you for the information
 
Now that's a nice plaque!

The A 100/450 x 5.25 was a Whitehead torpedo design, built under licence in 1913-1914. It incorporated a heater system (hot air as oppose to the earlier cold air driven torpedoes) and was adopted for limited runs - i.e. 1000 /2000 meters, depending on the PSI. These were found to be suitable for both torpedo boats and submarines. The "A" denotes all steel construction (as oppose to phosphor bronze), the 450mm is the diameter (i.e. 18") and the 5.25 was the length in metres.
Cheers
 
Last edited:
Dronic69 said:
Now that's a nice plaque!

The A 100/450 x 5.25 was a Whitehead torpedo design, built under licence in 1913-1914. It incorporated a heater system (hot air as oppose to the earlier cold air driven torpedoes) and was adopted for limited runs - i.e. 1000 /2000 meters, depending on the PSI. These were found to be suitable for both torpedo boats and submarines. The "A" denotes all steel construction (as oppose to phosphor bronze), the 450mm is the diameter (i.e. 18") and the 5.25 was the length in metres.
Cheers
Click to expand...

Great information, thank you very much
 
You must log in or register to reply here.
Top