dano1917
RIP
Well since i've finished the GRZ14n/A fuze this will be my current project. This is a German WWI Dopp Z15 and came to me in the same deal as the other which also included a KZ11. Anyway the Dopp Z15 is pictured. The rusted mid section had been filled with a type of body filler which I completely removed with the wire wheel attachment to my Dremel tool. I am about lost at this point because it is in that section of the fuze where the Dopp Z15 stamping is supposed to go. I have already figured on refilling the mid section with "fill lite" but my dilema is how to replicate the Dopp Z15 stamping. I am not totally against not filling the rusty section but stamping right on the corrosion and that would keep the relic theme a reality. Any hints and or suggestions would be more than welcome. I've pondered about taking the stamping to my local graphics shop and see if they could make a facsimile decal? These Z15 fuzes are not too easy to come by so I figure it's this one or nothing. In case you haven't noticed I am somewhat lost here. The KZ11 will not be restored in any way because I like the way she looks as is. HELP......Dano
Attachments
Last edited: