What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

apds tin

leeski

leeski

Well-Known Member
Premium Member
picked this up at the local booty today on the side is SHOT APDS SX 137GE it has been painted over and re stenciled any reason for this ?
and stamped in the lid is ROF (W) 41 HB&S 1968 the tin is 5" wide and 12" long what sort of apds would have been inside

regards lee
 

Attachments

  • 002.jpg
    002.jpg
    39.5 KB · Views: 43
  • 003.jpg
    003.jpg
    20.6 KB · Views: 24
  • 004.jpg
    004.jpg
    28.5 KB · Views: 20
Hi Lee, nice tin. Just going off the measurements you give (5 inches diameter = about 127mm) it would seem safe to say it would be a 120mm apds that went in the tin. All the apds projectiles that I have that are still in tins/plastic cases are a fairly snug fit so it would be too large for a 105 or 110 apds.
Dave.
 
H.b.& s.

Lee the tin was almost certainly made at the Woodley factory (a mile down the road from me) of Huntley bourne and Stevens 1968 as they produced a lot of ammo tins during their time in the Woodley factory.
 
You must log in or register to reply here.
Top