No 94 rifle grenade Re-paint

[paul the grenade]

Been real busy today re-painting a bare metal No 94 Rifle Grenade I bought recently. I sprayed the whole gren Bronze Green then airbrushed the red band while spinning it on a turntable. then spent about 2 hours carefully cutting out the stencil. Im sure you will all agree it has come out great. well im very pleased with the results anyway. Unfortunately i only decided to start taking pics when i was cutting out the stencil, so the first stages of painting are undocumented. anyone got a spare fuze cover? cash or trades waiting. cheers, Paul.

 

[butterfly]

Great job Paul, especially that stencil, you need a steady hand for that. Well done

regards Kev

 

[smle2009]

wow,nice job Paul

 

[roller63]

That's great Paul, top job ! I don't have a spare fuze cover but have seen them at shows, and will keep an eye out for you. I expect someone here must have one going spare

 

[roller63]

Paul has usually got some grubby ones in one of his boxes, not on the website, but contact him Paul and see if any left, they should clean up well being plastic.

http://pdhenterprises.co.uk/index.php

 

[Millsman]

Very impressed by the stencil cutting. Your tool box should have "supercalifragilisticexpialidocious" on the side!

John

 

[paul the grenade]

Paul has usually got some grubby ones in one of his boxes, not on the website, but contact him Paul and see if any left, they should clean up well being plastic.

http://pdhenterprises.co.uk/index.php

I spoke to paul and he has a few. Thanks for the tip of Tony:tinysmile_fatgrin_t

 

[Snufkin]

And here's the painting and stencilling drawing.



Tom.

 

[roller63]

I spoke to paul and he has a few. Thanks for the tip of Tony:tinysmile_fatgrin_t

You are very welcome Paul. I thought he did !

 

[paul the grenade]

Managed to get a few missing parts to finish of the No94 Mk2. The dust cover for the fuze came from Paul Heddell http://pdhenterprises.co.uk/index.php and the launching blank was a freebee from Grapeshot. Thanks to everyone who has helped me with this project.:tinysmile_shy_t:
Cheers, Paul.

 

[Andysarmoury]

Brilliant job Paul well done.
Andy