Small calibre RWS cartridge for id please

[Rrickoshae]

Please see the attached photo, it’s the small bottle neck round in the centre that I can’t identify. Each side of it is a Morris 297/230 short & long. The headstamp reads RWS *. Any thoughts please?

many thanks, Dave

 

[ydnum303]

Please see the attached photo, it’s the small bottle neck round in the centre that I can’t identify. Each side of it is a Morris 297/230 short & long. The headstamp reads RWS *. Any thoughts please?

many thanks, Dave

Hello Dave,

Difficult to say for sure without some measurements, but it looks like the 5.3x22R "Z" Tesching, which was a cartridge for use in target pistols. It had a rim diameter of 9.3mm, and a base diameter of 8.15mm. The bullet measured 5.71mm diameter.

All this info from Volume 1 of "European Sporting Cartridges" by Brad Dixon.

Regards,

Roger.

 

[Rrickoshae]

Hello Dave,

Difficult to say for sure without some measurements, but it looks like the 5.3x22R "Z" Tesching, which was a cartridge for use in target pistols. It had a rim diameter of 9.3mm, and a base diameter of 8.15mm. The bullet measured 5.71mm diameter.

All this info from Volume 1 of "European Sporting Cartridges" by Brad Dixon.

Regards,

Roger.

Cheers Roger, that’s good enough for me! Best wishes, Dave

 

[Rrickoshae]

Thanks Roger, measurements fit exactly, well done! Dave

 

[ydnum303]

Thanks Roger, measurements fit exactly, well done! Dave

Good; glad to have been able to help!

R.