ZELJEZARA SISAK, unknown modification (Croatian Grenade):
Hi Guys,
does somebody of you know more details on the grenade on the right side of Foto 1-1?

The well known ZELJEZARA SISAK grenade has as shown on the left of Foto 1-1 usually
a pipe-endplug (see Foto 1-4 and 1-5), drilled with a 6mm hole for a slowburning timefuze
with a No.8 cap on the end.


This modification on the right side carries as a bushing that reduces the screw to the size
of the M75-grenade-Fuze on one hand and is closed on its bottom-side to prevent that
moisture and dirt get into the grenade (Foto 1-2). The adapter-bushing is not screwed in,
its pushed + glued in and fits very tight (Foto 1-3).


The fact that an factory-made plastic-adapter-bushing for accepting an grenade fuze is
something quite uncommon and the perfect match of the parts let me believe that this is no
field-improvisation but an factory-inprovement of the hasty made first production run which
was evtl. still on stock? Any reliable information would be very much appreciated.
I dont believe that the fuze is authentic, since these white-plastic-pattern of the fuzes is
a practice-fuze which did show up in the last years, the authentic pattern should be yellow
for the modified (live-made-practice-type) or evtl. black for the copies made in the new factories.
Since they have identical threads, I kept it for showing the principle on the fotos.




Thank you for any information.
PLease note: all items which are shown are 100% INERT and FFE and had been received like this already.
Regards,
Ralf
Hi Guys,
does somebody of you know more details on the grenade on the right side of Foto 1-1?

The well known ZELJEZARA SISAK grenade has as shown on the left of Foto 1-1 usually
a pipe-endplug (see Foto 1-4 and 1-5), drilled with a 6mm hole for a slowburning timefuze
with a No.8 cap on the end.


This modification on the right side carries as a bushing that reduces the screw to the size
of the M75-grenade-Fuze on one hand and is closed on its bottom-side to prevent that
moisture and dirt get into the grenade (Foto 1-2). The adapter-bushing is not screwed in,
its pushed + glued in and fits very tight (Foto 1-3).


The fact that an factory-made plastic-adapter-bushing for accepting an grenade fuze is
something quite uncommon and the perfect match of the parts let me believe that this is no
field-improvisation but an factory-inprovement of the hasty made first production run which
was evtl. still on stock? Any reliable information would be very much appreciated.
I dont believe that the fuze is authentic, since these white-plastic-pattern of the fuzes is
a practice-fuze which did show up in the last years, the authentic pattern should be yellow
for the modified (live-made-practice-type) or evtl. black for the copies made in the new factories.
Since they have identical threads, I kept it for showing the principle on the fotos.




Thank you for any information.
PLease note: all items which are shown are 100% INERT and FFE and had been received like this already.
Regards,
Ralf