What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

40mm projectile ID needed

Burney Davis

Burney Davis

Moderator
Premium Member
Can anyone identify the projectile in the attached pictures, and advise what base fuze and case would be fitted. No marks and band is original.

Thanks in advance.

D

DSCN6063.jpgDSCN6064.jpg
 
Sorry I cant give a positive i.d. on this, however it does remind of a 2 pounder AT gun projectile. If I may ask the length ? I don't know of an H E design for this however, it does look similar to my AP/T 2 pdr.
SHAKY
 
Hi BD,
It is just the profile of the driving band that has me confused, the cavity in the base looks a bit large for any 2pr I have seen, too big even for a No281 fuse.
Best Weasel.
 
could the thread in the base be for an adaptor rather than a fuze like the 3pr CD. and the band looks a bit 40mm L70 ie modern. Not much help in ID ing but it might get some ideas come up.
 
Thanks for the comment so far guys. The length of the projectile is about 142mm and the driving band is almost the reverse profile to a L/70. The L/70 is raised in the middle whereas this one is 'rebated'. I was thinking Italian 37/40 as the closest match but it isn't that either. The base threads are fine and could just be for a plug with the idea that the shock/heat of impact would set it off.

D
 
You must log in or register to reply here.
Top