This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Thanks to the advice of pzgr40:adore: , I made this cut. A 77 geschoss with its zinc fuze.
I also have a steel fuze and I may try internal cutting but it is complex.
I modeled myself on a vintage plate from the French archives.
It's name is "7,7 cm C-Geschoss" (like written in the drawing).
And well done, just on the lower end it seems you came out of center some mm. Most important: you didn't paint the cut surfaces colorful. I not really like painted cut surfaces, want to see the metal
Did you find manufacturer stamps on the inner side of the shell?
Ah it is on Alpini a few millimeters on this type of surface is possible.
But with a simple hacksaw, the result is still acceptable. The result is more acceptable for the community in France ...
I don't want to show you the different my different scrapnels.
I know the hacksaw work very well ;-). Doing such a work is like a quality test for good saw blades. But flatten the hacksaw cut with a file is sometimes the biggest work. My first sections were as straight as a banana
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.