British Ordnance Collectors Network
Join over 14,000 collectors of inert military ordnance. Get expert identification help for shells, fuzes, grenades, and more — plus access our classifieds marketplace and decades of archived knowledge. Free to register, takes seconds.
ATK 2B fuze drawing wanted
- Thread starter spotter
- Start date
You can find them on cat-uxo:
microplastic
Well-Known Member
Soviet aircraft mechanical time igniters AT series. (Авиационная трубkа)
-Post-war designs.
,,АТ-ЭБ,
АТ-ЭA,
АТМ-ЭБ,
АТК-ЭА,
АТК -ЭБ,
АТК -ЭБ1,
АТ-15Э
АТК -10ЭБ ,,
All of the above have an electro-pyrotechnic igniter release.
All have a 26mm thread.
The ignition release time is in the range of 6-9s.
Initiation time set in the range of 10 to 150 s.
The letter K in the designation means that the igniter design and the components used are resistant to kinetic heating up to 150 degrees Celsius/90 minutes.
АТ-15Э has a function time setting in the range of 1.5s to 15s.
In addition, there is a design line of mechanical time igniters of the TM-24 series, which have a different design and the release mechanism is of the external MDV type.
Akon
Warning: Everything I wrote may not be true, nor may it be the same opinion as you.
-Post-war designs.
,,АТ-ЭБ,
АТ-ЭA,
АТМ-ЭБ,
АТК-ЭА,
АТК -ЭБ,
АТК -ЭБ1,
АТ-15Э
АТК -10ЭБ ,,
All of the above have an electro-pyrotechnic igniter release.
All have a 26mm thread.
The ignition release time is in the range of 6-9s.
Initiation time set in the range of 10 to 150 s.
The letter K in the designation means that the igniter design and the components used are resistant to kinetic heating up to 150 degrees Celsius/90 minutes.
АТ-15Э has a function time setting in the range of 1.5s to 15s.
In addition, there is a design line of mechanical time igniters of the TM-24 series, which have a different design and the release mechanism is of the external MDV type.
Akon
Warning: Everything I wrote may not be true, nor may it be the same opinion as you.
Last edited: