MissingSomething
Well-Known Member
Has anyone ever seen the Mark "FE" on a Brit No.23????
Its upside down and under the spoon...
Its upside down and under the spoon...
British Ordnance Collectors Network
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
British No.23 Makers mark "FE"????
- Thread starter MissingSomething
- Start date
gothica7
Well-Known Member
Hi bud,
i reccon its just a casting mark only.
I have a list here of about 800 armaments manufacturers from WW1 and F E dosnt relate to any of them. List is in alphabetical order and so quite easy to check.
Dobson & Barlow, Kay Street, Bolton, the makers of the lever are there though. Nice gren by the way, but have to inform you that the lever is actually wrong for your gren. Its a modified 23/3 or 36 lever and would not have been issued for that gren. That lever type was designed by Gibbons in 1917 and its original use was for the 23/3 and a bit later the 36.
Andy
i reccon its just a casting mark only.
I have a list here of about 800 armaments manufacturers from WW1 and F E dosnt relate to any of them. List is in alphabetical order and so quite easy to check.
Dobson & Barlow, Kay Street, Bolton, the makers of the lever are there though. Nice gren by the way, but have to inform you that the lever is actually wrong for your gren. Its a modified 23/3 or 36 lever and would not have been issued for that gren. That lever type was designed by Gibbons in 1917 and its original use was for the 23/3 and a bit later the 36.
Andy
Last edited:
MissingSomething
Well-Known Member
Thanks Andy, I figured as much since it doesn't sit quite right :sad: