British Ordnance Collectors Network
Join over 14,000 collectors of inert military ordnance. Get expert identification help for shells, fuzes, grenades, and more — plus access our classifieds marketplace and decades of archived knowledge. Free to register, takes seconds.
Fuze Nose Perc L160 A1 tin question
- Thread starter AndyD
- Start date
If the tin is the Cylinder 719 then you need the F632
If the poly insert you have has 12 holes then its just the one layer.
You might want to look out for the bits that go inside the 719. I don't know specifically which ones you need for your L160 but typically these tins have a white rubber ring with an internal tab. A black rubber insert that fits around the shoulder, half way down the cylinder. A metal collet that fits over the black rubber and a white styrene bung. The tin has an internal metal lid with a rubber sealing washer fitted and a small rubber grommet.
You might want to look out for the bits that go inside the 719. I don't know specifically which ones you need for your L160 but typically these tins have a white rubber ring with an internal tab. A black rubber insert that fits around the shoulder, half way down the cylinder. A metal collet that fits over the black rubber and a white styrene bung. The tin has an internal metal lid with a rubber sealing washer fitted and a small rubber grommet.
Last edited: