What's new
British Ordnance Collectors Network

Join over 14,000 collectors of inert military ordnance. Get expert identification help for shells, fuzes, grenades, and more — plus access our classifieds marketplace and decades of archived knowledge. Free to register, takes seconds.

Information request please.

Beavertail

Active Member
Ordnance approved
Good afternoon,

I have been asked to help provide information on the 120mm Mortar Bomb picture in the attachment. The clean model was taken from our archive, with the rusted one is as found during a clearance task with the background removed. Unfortunately I am unable to share the location.

All features point to it being 120mm WP. Does any body have technical information they can share for this item?

Thank you
1789902294895.png
 
Hi Beavertail,

Just for interest, can you give details of the bomb - country of manufacture, Model / Mark and when these were produced?
 
Hi Beavertail,

Just for interest, can you give details of the bomb - country of manufacture, Model / Mark and when these were produced?
Hi Ammotechxt,

The one form the archive is of Czech origin, the one found seems to have markings (stamps) that indicate Russian manufacture as in former Warsaw pact, but with Russian factory codes. Further to that info is severely limited.
 
Hi Ammotechxt,

The one form the archive is of Czech origin, the one found seems to have markings (stamps) that indicate Russian manufacture as in former Warsaw pact, but with Russian factory codes. Further to that info is severely limited.
If you think that it is of Czech origin, you are wrong.No mine has ever been marked like this, either by a manufacturer in the Czech Republic or in such a way that this form of stenciling was introduced into the Czech army. Ad 2, no Czech mine had a labyrinth seal in the lower part as you have in the drawing and photo.Search elsewhere.for example: Bulgaria, Romania, Poland... or ?
Akon
 
That.s just it Akon_, I don't think it is of Czech origin, I am saying that the best match I can get is of a Czech model.

With regards to the markings I am just sharing what I see. I have look everywhere I can think of, and found nothing, which is why its on here.

I thought I was clear on that, but thank you for your input.
 
That.s just it Akon_, I don't think it is of Czech origin, I am saying that the best match I can get is of a Czech model.

With regards to the markings I am just sharing what I see. I have look everywhere I can think of, and found nothing, which is why its on here.

I thought I was clear on that, but thank you for your input.
Then there's that red band below the upper bourrelet [centring band] – that would indicate an incendiary version, not a smoke one. A mortar bomb [mine] of that weight was never adopted into service by the Czech Army... it has a noticeably elongated body...
Akon
 
Here's a great one I saw on the same site this today. Ignoring all the factual and technical errors, of which there are plenty, the first image shown is of a different penetrator, from a different calibre gun. Nothing new for this site I'm sorry to say.

Untitled.png
bm15-001.jpg
 
Top