M67 in section

[Fragman]

Hi, I'm looking at sectioning an M67. I've seen a few variatons, but am unsure how I want to do it (ie. 1/2, 1/3, 1/4 include sectioning the fuze assembly or leave it whole?). If you have any suggestions or photo's I look foward to your advice. Cheers

 

[GTR003121]

Hey Colin, don't cut it!! Send it to me!

A 60/40 is good, this way the fuze screws in so it's a solid setup and you still get a wide viewing area. Cutting it exactly in half vertically is no good IMO. Best of luck to you!

 

[Infanteer]

If you have any suggestions or photo's I look foward to your advice. Cheers

There are lots of photos in the "cutaway" section of the forum.

 

[Fragman]

Thanks (and thanks to those whom have PM'd me). I couldn't find any M67's in the cutaway section. Here's a couple of concepts I'm considering (1/4, 1/2, or windowed). I've shown them next to an M69 I did, that included the fuze assembly being sectioned (I think I'll leave this one whole). Cheers