Metal mine case

[Haplo]

Hi all

Got this metal case a while ago.
My idea was that it was for a Tellermine 35.
Only a tellermine 35 is 135x360x350 mm.
The case is 60x370x320.
Can't find what it is.
Does any one have an idea?
Made for beutte minen?

[ame="http://s159.photobucket.com/albums/t151/Bathoorn/WO2%20hobby/duits/Kist%20tellermine%2035/?action=view&current=PC080001.jpg"]Kist tellermine 35 :: PC080001.jpg picture by Bathoorn - Photobucket[/ame]
[ame="http://s159.photobucket.com/albums/t151/Bathoorn/WO2%20hobby/duits/Kist%20tellermine%2035/?action=view&current=PC080002.jpg"]Kist tellermine 35 :: PC080002.jpg picture by Bathoorn - Photobucket[/ame]
[ame="http://s159.photobucket.com/albums/t151/Bathoorn/WO2%20hobby/duits/Kist%20tellermine%2035/?action=view&current=PC080003.jpg"]Kist tellermine 35 :: PC080003.jpg picture by Bathoorn - Photobucket[/ame]

Regards,
Sipke

 

[Haplo]

If other pictures are needed, please let me know.

 

[MT-LB]

That metal box looks like the one for a tool/gauge set for various German guns - to make sure I have to check the measurements with mine, but can only do this next weekend.
That set contains different pieces to gauge the pressure of the recoil system. The box has a wooden insert in the lower part, there all pieces are stored. Will make pictures and take the measurements next weekend.
Erik

 

[Tmine35]

I saw a similar box, with contents, in auction a year or two ago. It was clearly a tool/gauge case for some artillery as MT-LB says.

 

[Haplo]

A bit late on the reply.
Sorry for that.

Thanks for the reply MT-LB and Tmine35.

@ Erik,
Allready had the time to take some pictures and mesurements?
And what kind of wood has been used?
Maybe i could restore it and fill it again with the tools that belong there.

All the best,
Sipke