Didn't know where to put this so its going here intil admin move it. May i suggest locking it and making it sticky?
The Defence Standard 00-810 is arranged in 21 Parts as shown below:
Part 1 – General
Part 2 - Bombs Aircraft
Part 3 - Bombs Mortar
Part 4 - Propelling Charges
Part 5 - Demolition Stores
Part 6 - Grenades
Part 7 - Guided Missiles, Components and Parts
Part 8 - Mines (Other Than Underwater Weapons)
Part 9 - Chemical Stores
Part 10 - Projectiles
Part 11 - Pyrotechnics
Part 12 - Free Flight Rockets and Rocket Motors
Part 13 - Small Arms Ammunition (below 20 mm)
Part 14 - Underwater Weapons
Part 15 - Experimental Ammunition
Part 16 - International Projects
Part 17 – Bursters, Exploders, Pellets and Tracers
Part 18 - Detonators, Igniters, Igniters Cartridge, Primers and Tubes
Part 19 - Fuzes and Gaines
Part 20 - Marking of Ammunition Packages
Part 21 - Nuclear Ammunition
It is essential that Part 1 is used when preparing ammunition marking drawings (AMDs). All other Parts shall be read in conjunction with Part 1 .
Enjoy, regards, Charlie
The Defence Standard 00-810 is arranged in 21 Parts as shown below:
Part 1 – General
Part 2 - Bombs Aircraft
Part 3 - Bombs Mortar
Part 4 - Propelling Charges
Part 5 - Demolition Stores
Part 6 - Grenades
Part 7 - Guided Missiles, Components and Parts
Part 8 - Mines (Other Than Underwater Weapons)
Part 9 - Chemical Stores
Part 10 - Projectiles
Part 11 - Pyrotechnics
Part 12 - Free Flight Rockets and Rocket Motors
Part 13 - Small Arms Ammunition (below 20 mm)
Part 14 - Underwater Weapons
Part 15 - Experimental Ammunition
Part 16 - International Projects
Part 17 – Bursters, Exploders, Pellets and Tracers
Part 18 - Detonators, Igniters, Igniters Cartridge, Primers and Tubes
Part 19 - Fuzes and Gaines
Part 20 - Marking of Ammunition Packages
Part 21 - Nuclear Ammunition
It is essential that Part 1 is used when preparing ammunition marking drawings (AMDs). All other Parts shall be read in conjunction with Part 1 .
Enjoy, regards, Charlie