What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

RG 7.62mm inspectors

smle2009

smle2009

Well-Known Member
Hi to all,
thought this one may be of interest,I presume it is an inspectors round.
Headstamped INSP (+) 99 RG,anvil present but flash holes omitted.
Any ideas on the 'departure' from the normal L3A1 usually found on 7.62mm inspectors rounds?

Cheers
Tony

PC020010.jpg
 
These may have been produced for the NRA when there was a bit of a furore about target rifles with tight spec. .308 chambers using 7.62mm military spec. ammunition. All a bit of a storm in a tea cup as far as I am aware.

There were also some produced in 2004. See this box.

Regards
TonyE
 

Attachments

  • L42A1 Inspection.jpg
    L42A1 Inspection.jpg
    49.8 KB · Views: 18
Many thanks TonyE,
did you get my reply to your e-mail t'other day re chargers?

All the best
Tony
 
Sorry, yes I did and it was very usefyul. Many thanks. Sorry I did not acknowledge it but have been rushing around the last couple of days!

Cheers
Tony
 
...just a bit more info on that,from personal knowledge and item owned that practice was still on going in 2006

Cheers
Tony
 
You must log in or register to reply here.
Top