British Ordnance Collectors Network
Join over 14,000 collectors of inert military ordnance. Get expert identification help for shells, fuzes, grenades, and more — plus access our classifieds marketplace and decades of archived knowledge. Free to register, takes seconds.
Spigot ... Vietnam
- Thread starter jvollenberg
- Start date
This is a VietCong recoiless rifle round. In mid to late 60s they were found along rivers and streams, but also used in the attack. Thewre were models that used dud US 105mm rounds. These used the same propelling system as the B 50 did.
Type. This is a fin stabilized, antipersonnel projectile mounted on a wooden stick. The projectile is
probably fired from a recoiless rifle launcher. A delay fuze is used with this projectile.
Painting and Markings.
Features.
Three circumferential grooves are cut in the base end of the stick. An end cap is nailed on
the base of the stick.
DESCRIPTION.
Material. The projectile body and fins are steel. The stick is wood. The windshield of the fuze is sheet
metal, and the fuze body may be aluminum or steel.
Weight. The projectile with fuze weighs approximately 45 pounds.
Arrangement. The internal arrangement of the projectile can be that of typical U.S. 105-mm projectiles. The fuze consists a Viet Cong firing mechanism and windshield.
Hazardous Components
The body of the projectile is filled with approximately 5 pounds of composition. The fuze utilizes a blasting
cap as a detonator, and granulated TNT (quantity unknown) as a booster. The quantity and composition
of the materials in the safety fuse and primer are unknown. An auxiliary detonating fuze (ADF) containing a 25-gram tetryl booster may be present.
Arming and Firing Function
The safety wire is removed from the fuze prior to firing. Upon setback, the striker overcomes the
anticreep spring and strikes the percussion primer which, in turn, ignites the safety fuse. After a 5- to
7-second delay, the safety fuse ignites the blasting cap, initiating the explosive train.
Type. This is a fin stabilized, antipersonnel projectile mounted on a wooden stick. The projectile is
probably fired from a recoiless rifle launcher. A delay fuze is used with this projectile.
Painting and Markings.
Features.
Three circumferential grooves are cut in the base end of the stick. An end cap is nailed on
the base of the stick.
DESCRIPTION.
Material. The projectile body and fins are steel. The stick is wood. The windshield of the fuze is sheet
metal, and the fuze body may be aluminum or steel.
Weight. The projectile with fuze weighs approximately 45 pounds.
Arrangement. The internal arrangement of the projectile can be that of typical U.S. 105-mm projectiles. The fuze consists a Viet Cong firing mechanism and windshield.
Hazardous Components
The body of the projectile is filled with approximately 5 pounds of composition. The fuze utilizes a blasting
cap as a detonator, and granulated TNT (quantity unknown) as a booster. The quantity and composition
of the materials in the safety fuse and primer are unknown. An auxiliary detonating fuze (ADF) containing a 25-gram tetryl booster may be present.
Arming and Firing Function
The safety wire is removed from the fuze prior to firing. Upon setback, the striker overcomes the
anticreep spring and strikes the percussion primer which, in turn, ignites the safety fuse. After a 5- to
7-second delay, the safety fuse ignites the blasting cap, initiating the explosive train.
Deacon Jim
Member
If you can find a copy of "NORTH VIETNAMESE AND VIET CONG MANUFACTURED AND IMPROVISED MUNITIONS", by Michael E. Weber, it has extensive coverage of this type of weapon. I hesitate to post my copy for 2 reasons- One, it is copyrighted, even if there is no date, and two, Mr. Weber obviously did an extensive amount of research and hard work to produce it. He deserves any recompense from it. I can't for the life of me recall where I got it. I was at least before 2016, which is the date I've got on it. Any advice?
Deacon Jim
Member
Also, I can find no mention of the title on the web.
Deacon Jim
Member
Upon refection, I remembered the author being part of a Facebook group og Grenade Collectors, of which I was a part. I left Facebook about 5 years ago. If I recall correctly, the copyright was so that no one could print it and claim it as their own. It was given by him to a group of kindred souls. I believe he would approve. They are both about 20mb, so I will try to upload them to the library.
Deacon Jim
Member
I have tried my best to upload this file. I even split it into 4 parts, each less than 20mb, but no go. Does anyone know an outside service or whatever so I can share this?
