What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Unknown bomb ID HELP PLEASE

Hello neighbor, It is definitely different from the U.S. Depth Bomb, but it does have that style and look, perhaps a later design? What do the suspension lugs look like? Pat
 
The double fuze wells in the tail almost look like a US dispenser for firebombs. Cheers, Bruce.
 
HMMMM water heater with fins ? (just kidding)
The body looks like an M31 cluster bomb with out the M25 adaptor casing
The tail matches the fuze configuation
But no lugs and the rounded nose seems to indicate an M30E1
The length from what I can judge seems a bit short though
Heres a couple of links that might shed some light on this
the 646 link shows an M30 M30A1 and M30E1 cluster adaptors the drawings show a rounded
nose for the M30E1 variant also no lugs present

http://maic.jmu.edu/ordata/srdetaildesc.asp?ordid=1033
http://maic.jmu.edu/ordata/srdetaildesc.asp?ordid=1035
http://maic.jmu.edu/ordata/srdetaildesc.asp?ordid=646
http://maic.jmu.edu/ordata/imagedisplay.asp?ordid=646&imagetype=1&imageflag=0&imagezoom=0

C0878UP001.JPG

53678084336.jpg
 
Last edited:
Re read Been doing a little research
It may be just the upper casing with fin assembly
Then someone topped it off with the rounded nose later
Could have been a flight dynamics work up ?????

I REALY WISH YOU GUYS WOULD STOP KEEPING ME UP SO LATE :tinysmile_grin_t:
 
Last edited:
I keep seeing that the hinges have been ground down, from what the picture shows. Maybe, if not the dynamics test, someone truing to make what looked like a bomb out of a cluster container. Cheers, Bruce.
 
A couple of additional photos with more detail would be helpful, as well as some measurements - diameter, oal, etc.

Depending on the size, fill material and phase of developement, strap-on suspension is always a possibility. It is not completely uncommon to see WWII era dispensers and bombs with their suspension lugs removed if they were of this type. It was done sometimes by the US to avoid the need to increase the wall thickness and strongback of the carrier, which increased the overall weight and lowered the capacity. It was also used to adapt items not normally set up for carriage by our bomb racks (Japanese bombs, large caliber projectiles, etc). Here is a Russian example that should illustrate the point. I'm not in the library at the moment, so cannot dig too much yet.

Start with some pictures showing how the item is assembled and some measurements, we can search better after that.


FAB 100 Soviet.jpg
 
Ill have better pics, and measurments soon its currently at a freinds house hope I can pick it up this next weekend
 
Top