clam Mk 1 (Metal)

[sgtlynn]

does anyone have a good photo or drawing showing the internal construction of the Clam Mk 1 (Metal). I am trying to determine the internal construction. Is the centre explosive container a separate box that is riveted into the outer container or are there two "Dividers" (one at either end) riveted into the outer casing to form the centre explosive container. I haven't been able to find a photo that I can determine one way or the other. thanks for any help you can provide.

 

[switch]

does anyone have a good photo or drawing showing the internal construction of the Clam Mk 1 (Metal). I am trying to determine the internal construction. Is the centre explosive container a separate box that is riveted into the outer container or are there two "Dividers" (one at either end) riveted into the outer casing to form the centre explosive container. I haven't been able to find a photo that I can determine one way or the other. thanks for any help you can provide.

Evening

The Clam MkI metal uses two metal semicircular dividers rivetted inside to the main body, one at each end. These dividers provide the securing lug for each magnet, and the threaded holes for the screws that secure the the bottom cover plate.
Hope this helps for now, and will sort out a picture when I have a minute.

Cheers
Switch

 

[sgtlynn]

Evening

The Clam MkI metal uses two metal semicircular dividers rivetted inside to the main body, one at each end. These dividers provide the securing lug for each magnet, and the threaded holes for the screws that secure the the bottom cover plate.
Hope this helps for now, and will sort out a picture when I have a minute.

Cheers
Switch

exactly what I needed!! Thanks!! Photos would be great. Appreciate all the help.

 

[switch]

Evening again.
Sorry for the poor quality pics, but hope these are good enough to explain.
Cheers
Switch

 

[sgtlynn]

These photos are perfect. I suspected this was how they were constructed but couldn't confirm it, now I can. Thanks again!!

cheers
D