This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
It's a "Brennzunder / 30 sekunden" Time (Combustion) Fuse
This was an experimental two-ring fuse of the same contours as the mechanical time S/30 patterns. Developed late in the war and only a few were used.
Probably quite rare!
I mis something on your fuze !
All the pyrotechnic time fuzes I known have one or more holes to let the combustion gas escape out the fuze when burning.
Where is this on your fuze ?
Attached there is a PDF file about the 10.5 cm projectile and the fuze.
It is a bad quality but other information I'm not allowed to put on BOCN.
I can tell you the following as well.
When the projectile is fired the primer will hit the strikerpin (this will be left on the photo I put op two days ago).
Due to the gas pressure a small folie right of the strikerpin will burn away and small locking ball will be pressed to the right so that the gasses can go into the space on the right and into the top of the fuze.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.