What's new
British Ordnance Collectors Network

Join over 14,000 collectors of inert military ordnance. Get expert identification help for shells, fuzes, grenades, and more — plus access our classifieds marketplace and decades of archived knowledge. Free to register, takes seconds.

USSR mines (Antipersonnel)

_Borman_

Well-Known Member
Training mines.

У-МС-3 (mine surprize) 85 year (Afganistan). (U-MS-3)

ПФМ ("Petal") (dropped from airplain and helicopters) (Afganistan) (PFM).
 

Attachments

  • IMG_4043.jpg
    IMG_4043.jpg
    59.5 KB · Views: 145
Hi The Y MC 3 mine looks very similar to the PMN mine , except the MC 3 has a domed top.
 
Hi The Y MC 3 mine looks very similar to the PMN mine , except the MC 3 has a domed top.

The MS-3 is not a mine, it's an anti-lift device which is why it has the strange cover and the OP is referring to it as a "surprise" mine.
 
Hi Eodek thanks for that additional information , very helpfull.
 
У-ПМН-2 (U-PMN-2)
training
 

Attachments

  • P1030596min.JPG
    P1030596min.JPG
    78.3 KB · Views: 87
  • P1030597min.JPG
    P1030597min.JPG
    79.9 KB · Views: 54
Here the Anti personel mine (PMN) and the booby trap (MS-3) as cutaway models. Both in a fired position. During laying of the mine a lead strip is pushed through the steel wire loop on the back end of the firing pin. It takes some time before the springtension of the firing pin spring will let the wire cut through the lead (takes at least 5 minutes). This forms the safety while laying and covering the mine.
regards DJH
 

Attachments

  • M-PMN-01-Russ-sec.jpg
    M-PMN-01-Russ-sec.jpg
    94.4 KB · Views: 85
  • M-Uberraschungsmine MS3-Russ-01-sec.jpg
    M-Uberraschungsmine MS3-Russ-01-sec.jpg
    91.7 KB · Views: 86
Here the Anti personel mine (PMN) and the booby trap (MS-3) as cutaway models. Both in a fired position. During laying of the mine a lead strip is pushed through the steel wire loop on the back end of the firing pin. It takes some time before the springtension of the firing pin spring will let the wire cut through the lead (takes at least 5 minutes). This forms the safety while laying and covering the mine.
regards DJH

Yes, when you lift feet - boom.
 
On request, both mine and boody trap in armed position.
Left picture : a PT-Mi-Ba-III anti tank mine , boobytrapped witg a MS-3 anti lifting device. Lifting one side of the mine 5mm will set the MS-3 off.
Right picture: The PMN in armed position.


Regards DJH
 

Attachments

  • MS-3 Below a PT-MI-Ba_III (Czech.jpg
    MS-3 Below a PT-MI-Ba_III (Czech.jpg
    97.8 KB · Views: 79
  • PMN armed.jpg
    PMN armed.jpg
    99.4 KB · Views: 68
Last edited:
Top